The Forward and Aft VIP Seat Kits for the Bell 412 contain the VIP Seats, seat tracks, and attaching hardware. In the Forward VIP Seat Kit, the VIP Seats are located in provided seat tracks installed just behind the Pilot/Co-pilot seats. In the Aft VIP Seat Kit, the VIP Seats are located in provided seat tracks installed in front of the transmission pylon. The AA Utility Seats are compatible with the Forward and Aft VIP Seat Kit Installation. Unless previously arranged, the VIP Seat provided is an unfinished seat, to be completed with installer provided material and restraints in accordance with our drawing requirements. This is to allow the customer flexibility in seat finishing. The VIP Seats rotate, recline, translate and are provided with in-arm meal tray, break over back and stowable foot rest. The LH or RH seat nomenclature is relevant to the location of the in-arm tray and seat controls. “LH Seat” refers to the seat in a forward facing orientation, where the in-arm tray is located in the LH arm and seat controls are located on the RH arm. “RH seat” has an opposite location for the in-arm tray and seat controls. Note: These Bell 412 Seat Kits come standard without upholstery and restraints, but coverings and belts are available in different types/colors at an additional cost. Tan leather is pictured here. Contact a member of the Sales Team for more information: 423-538-5151 or 800-251-7094 Note: For accurate color scheme, please include the desired color code from the document below and specify in the special instructions. (P/N 3084-6-13X-XXX)